Need Assistance? Call Customer Service at 8531 6371 | 8725 8154

Accent Artworks and Furniture Pieces Using Pin Lights in Manila, Philippines


Table of Contents

By ensuring that the illumination in your space is both functional and aesthetic, you will also be able to create the mood you want. A room with good lighting usually has three sources of light: general, specific, and ambient lighting. Whether you’re building a new home or revamping your office, lighting plays an essential part in interior design.
In each project you take, you need to choose high-quality light fixtures so that everything lasts a long time. You can count on Ecoshift Corporation to provide you with the pin lights in Manila, Philippines you’re looking for. Since 2011, we have been supplying clients with wholesale, industrial, commercial, and architectural lights.

What Are Pin Lights?

Pin lights are small, circular fixtures that can be used in indoor or outdoor spaces. They are also called recessed lighting since they are installed directly inside a ceiling wall or any other surface.
These kinds of lights have three components:

  • Housing – The bulk of the fixture that contains the electrical components and is hidden within the wall or ceiling.
  • Trim – The decorative portion that is highly visible and may include baffles, reflectors, or shades.
  • Bulb – The part of the fixture that produces light.

What Are Pin Lights in Manila, Philippines Used For?

Categorized under accent lighting, pin lights can provide you with a smaller and more concentrated source of illumination while adding style and drama to any area. They highlight the pieces you want on display while helping you save energy by reducing the ambient light you need in the space around the object.
Pin lights can accent walls, artworks, bookcase displays, pieces of furniture, and more. However, you need to make sure that you don’t overuse them in a space as they can make a room appear disorganized or cluttered.

Why Are Pin Lights Popular?

Pin lighting is one of the most popular lighting options. The main reason why people opt for it is because fixtures that help you achieve recessed lighting take up less visual space. For example, pin lights don’t require any parts to hang down from where they’re installed, which helps prevent the area from looking too cluttered.
Pin lights can also make any room feel larger because of wall washing. This type of lighting effect uses the right trim type to cast more light into the space. By making walls appear brighter and more reflective using the right lighting products, you can also make your room look more open and spacious.
Lastly, pin lights come in various colors to further help you emphasize various design elements and achieve the mood or aesthetic you’re going for.

Where Can You Put Pin Lights?

Whether you’re looking for fixtures for your commercial or residential property, pin lights are a great choice. Here are a few areas where you can install them in:


Getting your bedroom lighting design just right is crucial, so you have a comfortable place to rest. You need to layer your ambient, task, and accent lighting well to ensure that everything is balanced. With the perfect combination of the three as well as the use of quality pin lights, you will be able to create the lighting needed to imbibe any mood with the flick of a switch.


With the number of options available, choosing the perfect lighting for your bathroom can be overwhelming. The vanity, tub, and shower area all require different fixtures but still need to come together in the end. Utilizing pin lights as accent lighting can help highlight your bathroom’s architectural features and décor.

Living Rooms

The living room is a multipurpose area where you and your loved ones can do a range of activities depending on the time of day. It can be where you entertain visitors, binge-watch your favorite shows, curl up with a good book, or simply kick your feet up to relax. From highlighting family photos and artwork on the walls to providing ample lights when you need to work, you can be sure that pin lights can help your living room look its best.


Help boost productivity, creativity, and overall well-being by installing the right lights in your office. Dim lighting can strain your eyes and make you feel drowsy, while excessively bright lighting can be too harsh and possibly cause migraines. By installing pin lights that emit a warmer yellow color, you can create an environment that is conducive for working and concentrating.


To ensure that you have the optimum viewing experience, theaters should have a layout and lighting design with limited distractions. Lighting fixtures in these rooms are usually dimmable and remote-controlled. Pin lights are subtle and can help you create the theater atmosphere you’re looking for while fully illuminating the area when needed.

Outdoor Spaces

Set the mood and create a seating area where you and your family can gather and enjoy a snack or beverage using a mix of the perfect lighting. You can use pin lights, which are both neat and discreet to look at, to illuminate your space and ensure that you can still see while enjoying your time under the stars.

How Do You Make Your Layout for Your Pin Lights?

You should make the layout of your pin lights according to each type of lighting needed in a room. You could require general lighting to enhance the illumination in the entire room, task lighting just above your countertop, or accent lighting to highlight a portrait on a wall. If you want, a combination of all three is also possible.
To ensure that your kitchen, living room, bedroom, office, or bathroom is lit correctly, here are a few things you could do:

Make a Blueprint

Ready your sketchbook and pencil in exactly where you want your pin lights to go. Make sure to take measurements of any furniture in the room and create paper shapes that are appropriately scaled. Using this method, you’ll be able to see where the light will fall and adjust things accordingly.
For general lighting layouts, your fixtures need to provide even illumination throughout your space. Your pin lights should be aligned, equally spaced across the ceiling instead of placing them according to the furniture you have in the room.
On the other hand, you need to remember that your lights don’t need to be aligned with your general or accent lights for task lighting layouts. If you have vaulted ceilings, it is recommended that you use sloped light fixtures and adjustable trims to compensate for the inclined ceiling’s angle. These items can also allow your light to point straight down and reduce glare in rooms where the seating faces the slope of your roof.
Lastly, accent lighting can draw attention to pretty much anything on your walls or tabletops. If a layout leaves you with a light directly above your television, you must adjust your design and separate it into two control zones. Being able to control one or more of the lights independently from the rest gives you the freedom to dim or turn off the row of pin lights in front of your television while still having illumination over the sofa from the other row of lights.

Choose Which Areas You Want To Emphasize

If you already have a particular spot in mind that you want to emphasize, make your starting point. For kitchens, you might want to install pin lights directly above the stovetop or sink so that you have enough illumination when doing particular tasks. Similarly, you may have a specific reading chair in your living room that you know needs extra lighting.
However, if you can’t decide on a focal point, you can place your first light in the center of the room and go from there. Don’t be afraid to experiment and consider different fixtures before eventually deciding on the one you want to permanently install.

Follow the Ceiling Height Rule of Thumb

To find out how much space you need between your pin lights, simply divide your ceiling height by two. If your room has a vertical distance of ten feet from its floor to its ceiling, then you should space your fixtures approximately five feet apart.
Remember that this is only a baseline. After considering the type and wattage of light you’re using as well as the purpose of your illumination, you can space your fixtures closer or farther apart. To make things easier, some people invest in dimmers to control the brightness of their lights.

Avoid Shadows in Corners

Shadows in corners affect how your room appears since it makes your ceiling look lower than it actually is. When installing your pin lights, make sure that your fixtures are approximately three feet away from the wall. Having light reflect on your walls at the appropriate distance makes any room seem brighter and larger.

How Do You Install and Replace Pin Lights?

Although it also depends on the kind of fixture you’ve installed, pin lights are relatively easy to replace. You need to think about the bulb itself as well as the safety implications of the task. Here’s a step-by-step guide on how you can change this specific sort of light with ease:

Determine the Type of Bulb You Need (H3)

One of the most important things you need to do is determining the correct type of bulb you need. You need to purchase one that has the same wattage as your other fixtures so that it doesn’t stand out when you turn on your row of pin lights. Furthermore, if you’re utilizing dimmable lights, you need to get a bulb that you can adjust the brightness of so that it responds well when you try to dim the lights.

If you’re unfamiliar with the sockets you have in your space, it would be best to contact the professional who helped install them. Being sure about your sockets enables you to avoid wasting money by purchasing unusable or incompatible light bulbs.

Switch Off the Power

Regardless of what bulb you’re changing, you should always switch off the power. Incandescent filaments can heat up to 2550°C. However, the bulb’s surface usually only reaches around 250°C. Although LED bulbs produce 95% less heat than their incandescent counterparts, you still need to practice caution when replacing them.

Unscrewing it from its socket while it’s still on may cause you to electrocute yourself in the process. If your bulb has blown out and you can’t remember if you’ve turned the switch off, you can cut the electricity using your circuit breaker in your property’s fuse box. It’s always better to be safe than sorry.

Once the power is completely off, wait for a few minutes so that the bulb could cool. Even if you use a towel or wear gloves, it may still be too hot to handle, and you could accidentally burn yourself or drop it.

Get a Ladder and a Pair of Gloves

Prepare a ladder and keep the new bulb close by. Using this tool instead of standing on random furniture ensures that you have a stable platform to stand on while you change your bulb. You also risk the chances of damaging your chairs and desks if you stand on them while changing your bulb.

Afterward, grab a pair of gloves that you can use. Although this step is entirely optional since others say that they can handle the heat produced by their bulbs, some people still prefer to wear protective gear to lessen the chances of burns and electrocution.

Take Out the Old Bulb

With your gloves on and your ladder steadily in place, take out the old bulb. If it doesn’t want to come out, you may want to wiggle it a bit so that you can loosen it. Make sure not to grip it too tightly since this may lead to damage.

Replace the Bulb

Push the new bulb inward and gently turn it clockwise until it locks onto place. Make sure that you twist it until it doesn’t go any further to avoid bulbs accidentally falling out of their sockets.

Test It

For the last step, make sure to test your new bulb to see if it works. If you turned on the power switch and it doesn’t light up, you may want to try tightening the bulb. However, if it still doesn’t work, there is a high probability that the bulb or socket is defective. You may want to consult with a professional in this case.

Where Can You Buy Pin Lights?

Finding a trusted LED lighting supplier in Manila, Philippines can be difficult, especially since you have various companies to choose from. Luckily, you don’t need to look further than Ecoshift Corporation. We offer a wide range of lighting products at wholesale prices, such as LED aluminum profiles, pin lights, wall lamps, dimmable lights, and more.


Nowadays, just having one lighting fixture in your room simply won’t cut it because of the shadows that it will cast throughout the space when turned on. Layering lights is now integral to achieve good lighting, which is why pin lights have slowly become more and more popular over the years.

At Ecoshift Corporation, we can help you get everything you need. We are a trusted supplier of industrial, commercial, and architectural lighting products since 2011. Furthermore, we deliver to various areas in the Philippines, including Metro Manila, Davao, Cavite, Laguna, Iloilo, Pampanga, Zamboanga, and Cagayan De Oro.

You can also pay for our products using your credit card, GCash, or PayMaya when purchasing items from our shop. Depending on the mode of payment you prefer, you can even pay for your items with a 0% installment plan for up to six months. This financial option enables you to make unexpected purchases or payments without putting a dent in your budget.

For more information about our company and the products we offer, feel free to get in touch with us today! We look forward to working with you.


Blog Feature

Similar Blog Projects

Our Feature Projects

Scroll to Top